The BCM air cooling system offers high efficiency cooling solutions for large facilities.
MASTER air coolers stand out for their low consumption and great efficiency, allowing air cooling of large spaces with a minimum operating cost. Master evaporative systems adapt to our climate and are an excellent alternative to condition large spaces with low energy costs.
The installation is simple, since it’s sufficient with the positioning of the evaporative equipment on the roof or façade and connect it to a water supply and single-phase electric current. Thanks to its lightness, it doesn’t require cranes or large supporting structures for the installation and commissioning.
The operation is also simple. Outdoor hot air is moistened and cooled as it passes through water-soaked filters, and is then driven indoors at up to 12°C lower temperature. Thus, a constant flow of fresh and natural air is projected, which is introduced clean into the room, eliminating bad odours, germs and dust all at the same time. This promotes the constant renewal of air that doesn’t recirculate, generating a healthy environment.
This system offers several practical self-management systems:
Self-management water cleaning system – thanks to its electronic structure and components (electrovalve, drain valve and level sensors), Master equipment has an automated system for cleaning, emptying and filling the water tank.
Pre-cool – the evaporative cooler enters a pre-cooling mode for one minute, just before the engine starts to operate, thus ensuring the cooling from the first moment.
Auto mode – with the previous adjustment of the required values of temperature and humidity, this mode allows the equipment to operate autonomously and efficiently by regulating its air flow rate, as well as water levels according to the values (Tº and %RH).
Auto clean – this function allows a period of time (hrs.) to be set for the automation of unit cleaning. Programmable period of time from 0 to 72hrs. The water drain valve opens allowing its exit and in this way the corresponding cleaning. After one minute the inlet solenoid valve opens, giving rise to new water inlet in the tank. This self-cleaning mode is adjusted according to the measures and recommendations for prevention and control of Legionellosis.
BCM models are available as either top, bottom, or side discharge, offering maximum flexibility to suit the broadest range of environments/buildings.
|Unit||BCM 191||BCM 131||BCM 511|
|Cooling pad – total surface||dm³||201||306||420|
|Cooling pad size – 1 pc.||cm||75 x 67 x 10||87 x 88 x 10||100 x 105 x 10|
|Air exit||mm||Down or top or side||Down or top or side||Down or top or side|
|Remote control integration||SM 4.0||Yes||Yes||Yes|
|Product size (l x w x h)||mm||1100 x 1100 x 960||1280 x 1280 x 1170||1500 x 1500 x 1450|
Download Spec Sheet
£2,603.57 – £6,075.00
Don't be surprised to see the odd PhD knocking around our office. When you work with Vertikit you are choosing actual leaders of the field. We've got years of research experience and practical project knowledge to share.
With our level of experience comes the ability to be really creative when it comes to product choices. Our curated product catalogue comes from the world's best suppliers of the specific technologies you need to succeed, regardless of whether they are farm-specific.